|
|
| WINNER |
Performance & Customization - Entry 42 |
|
|
|
Cargo Management System |
|
| OEM: | Ford | |
| Model: | Escape | |
| Model Year: | 2005 | |
| System Supplier: | Lear Corporation | |
| Molder / Processor: | SCA Packaging North America | |
| Toolmaker: | Lear Corporation/SCA Packaging North America | |
| Material Supplier: | JSP International | |
| Generic Resin Type: | EPP | |
| Resin Trade Name: | Arpro | |
| Grade: | N/A | |
| Summary: A molded expanded-polypropylene (EPP) foam structure, combined with a blow-molded lid and deep-draw thermoformed carpet, creates a lightweight system that meets Ford's tough load / deflection requirements for a cargo management system. A tongue-and-groove design ensures fit to vehicle during installation at the assembly plant. The system provides significant additional secure storage. | ||
| Finalist |
Performance & Customization - Entry 27 |
|
|
|
Midbox Door Assembly |
|
| OEM: | General Motors | |
| Model: | Colorado / Canyon | |
| Model Year: | 2005 | |
| System Supplier: | Decoma SVEA | |
| Molder / Processor: | Carlisle | |
| Toolmaker: | N/A | |
| Material Supplier: | Washington Penn/Soliant | |
| Generic Resin Type: | TPO | |
| Resin Trade Name: | N/A | |
| Grade: | 151 | |
| Summary: A thick-sheet thermoformed outer skin with paint film is bonded to an inner structure, creating the largest and flattest application of a Class-A body panel. Midbox is the first vehicle of its kind where GM builds a vehicle with an approximate 600-mm space between the cab and box. The Tier I supplier installs a midbox with a fully enclosed, lockable storage compartment that is fully integrated into vehicle styling. | ||
|
Performance & Customization - Entry 26 |
||
|
|
Blow-Molded Functional Hood Scoop |
|
| OEM: | Aftermarket | |
| Model: | N/A | |
| Model Year: | 2005 | |
| System Supplier: | Decoma - Imageworks | |
| Molder / Processor: | Projxauto | |
| Toolmaker: | Projxauto | |
| Material Supplier: | Dow Automotive | |
| Generic Resin Type: | ABS | |
| Resin Trade Name: | Magnum | |
| Grade: | 1250BG | |
| Summary: A functional hood scoop was created with minimal tooling investment. The design features an integrated beam structure and allows the interchange of front screens to match vehicle harmony. A designed-in beam provides structural support to prevent thermal sagging. | ||
|
Performance & Customization - Entry 56 |
||
|
|
Cargo Bedliner Support Block |
|
| OEM: | DaimlerChrysler | |
| Model: | Dodge Caravan | |
| Model Year: | 2006 | |
| System Supplier: | Enerflex Solutions | |
| Molder / Processor: | Diversified Plastics | |
| Toolmaker: | Polymolds | |
| Material Supplier: | JSP International | |
| Generic Resin Type: | EPP | |
| Resin Trade Name: | Arpro | |
| Grade: | LB30A | |
| Summary: Expanded polypropylene (EPP) foam blocks provide a structural bridge between the underbody sheet-metal structure and the load floor to create a flat floor that permits the overlay of a flat bedliner. This easily removable component allows customers to customize their vehicle for additional storage space. Over 60% weight savings and 30% cost savings were achieved vs. alternative designs. | ||
